News

1. The working environment of the air compressor should be kept clean and dry. The gas storage tank must be placed in a well-ventilated place, and sunlight exposure and high-temperature baking are strictly prohibited. 2. The installation of power wires for air compressors must comply with the requirements of safe…

The selection of the air compressor is mainly based on the working pressure and flow of the pneumatic system. The working pressure of the gas source should be about 20% higher than the maximum working pressure in the pneumatic system, because the along-course loss and local loss of the gas…

 Benefits for users: A． Equipment operation cost is low Since the oil-free machine only needs less spare parts consumption: no need to add and replace lubricating oil, no oil filter consumption, no oil removal filter to reduce oil content, no oil-air separator core (multi-stage) There is no need for…

Working principle of screw air compressor The compressed air system uses a twin-screw air compressor. The work of the machine is divided into three processes: intake, compression and exhaust: 1. Inhalation process: The motor drives the rotor. When the red groove space of the master and slave rotors turns to…

The use of air compressor 1. Compressed gas is used for refrigeration and gas separation: The gas is liquefied after being compressed, cooled, expanded, and used for artificial refrigeration (refrigeration and air conditioning, etc.) such as ammonia or Freon air compressors. The compression pressure is mostly 8-12 kg/cm2, and this…

 When choosing a good air compressor, pay attention to the following points: 1. The level of exhaust pressure and exhaust volume should be considered. According to the national standard, the exhaust pressure of the general-purpose air compressor for aerodynamics is 0.7MPa (7 atmospheres), and the old standard is 0.8MPa…

  Since the birth of the screw air compressor, the profile of the screw rotor has experienced many reforms. With the development of computer technology, people have been able to develop a variety of high-efficiency profiles that are currently recognized. Manufacturers of screw air compressors in the world can also…

The purpose of any air compressor control system is to most efficiently match the demand and supply of compressed air. While old-fashioned electropneumatic controls are being replaced by microprocessor-based controls with optimized systems and software upgrades for control parameters, any type of control is either fixed-speed or variable-speed control.  …

  When disassembling bearings, sealing parts and lifting rotor, knocking and collision are strictly prohibited to prevent parts from being damaged.   Parts with the same shape should be numbered and grouped, and the matching parts should be marked and kept correspondingly to prevent wrong installation.   Complete sets of…

   Air compressors can be divided into low-pressure air compressors and high-pressure air compressors according to the level of pressure. Exhaust pressure refers to the highest pressure of the air compressor exhaust gas, generally expressed in bar or Mpa, 1bar=0.1 Mpa users often refer to the pressure unit as:…