Troubleshooting screw air compressors in the laser cutting machine industry is very important, the following are some common troubleshooting guides:
The pressure is unstable or cannot meet the requirements: If the pressure of the screw air compressor is unstable or cannot meet the requirements, it may be caused by pipe blockage, filter blockage, pressure switch failure, etc. The first thing to do is to check the pipes and filters, and clean or replace clogged parts. If the problem persists, the pressure switch needs to be checked and repaired or replaced.
Compressor temperature is too high: If the temperature of the screw air compressor is too high, it may be caused by insufficient lubricating oil, cooler failure and other reasons. First of all, you need to check whether the lubricating oil is sufficient, and replace or add lubricating oil in time. If the problem persists, the cooler needs to be checked and repaired or replaced.
Compressor noise is too loud: If the noise of the screw air compressor is too loud, it may be caused by equipment damage, bearing failure and other reasons. First of all, it is necessary to check whether the equipment is damaged, and repair or replace the parts that need to be replaced. If the problem persists, the bearings need to be inspected and repaired or replaced.
Lubricating oil leakage: If the screw air compressor leaks lubricating oil, it may be caused by aging or damage of the seals. The seals need to be inspected first, and repairs or replacement parts need to be replaced.
There are peculiar smells or foreign objects in the air: If there are peculiar smells or foreign objects in the air when the laser cutting machine is working, it may be caused by air pollution, filter damage, etc. First of all, you need to check whether the filter is damaged, and replace the filter in time. If the problem persists, it needs to be checked for other contamination and cleaned or replaced.
By implementing these troubleshooting guidelines, maintenance personnel can find and resolve screw air compressor failures more quickly, ensuring the normal operation and productivity of the laser cutting machine.
Sollant Focus on Energy Saving
